The buildup of oil and grime on your ball, you know, might affect its integrity and make it difficult for it to hold the lane as it falls. The surface of a bowling ball is porous, making it easy for dirt and filth to become stuck in the ball’s tiny pores.

When your bowling ball strikes the pins, it will lose some of its typical force. Aside from accumulating dust, the accompanying oil is often derived from the lane conditioner used on the bowling ball. Therefore, an issue of how to clean a bowling ball arise.

In bowling, the oil that a lane conditioner supplies are critical since it preserves the lane surface and aids your ball’s performance. However, if there is too much in the bowling ball, you will lose the ability to hook it.

However, if you put in some effort, you may quickly get rid of the oil. With the help of these items, you can maintain the cleanliness of your bowling ball.

Easier Cleaning

Reduce oil accumulation to make cleaning easier. When the oil is still fresh on your ball, wiping it off will be the most straightforward task. To keep your ball in top shape, wipe it down after each game. Keep a ball towel in your bowling bag for this purpose and throw it away after each game so that oil doesn’t accumulate on the cloth and get transferred to the ball again. To clean a bowling ball at home, submerge the ball in a diluted cleaning solution.

It’s best if your ball towel is made of lint-free microfiber. A lint-free cloth and microfiber cloth both maintain your ball’s finish and prevent threads and other bits of fabric from rubbing on it and changing the way you play.

Towel off your ball after each shot for optimal results and consistency. It’s a good idea to switch to a fresh towel after roughly half an hour of extended gaming.

How To Clean A Bowling Ball
How To Clean A Bowling Ball: Cleaning Methods 2

Rubbing alcohol

Using rubbing alcohol, moisten your cloth. The ball will be heated from the friction of the lane as soon as you stop bowling. Heat expands the pores of your ball, making it easier to clean. Using a small amount of alcohol to moisten your rag and wipe clean the whole surface of your ball can save you time and money.

Take a dry section of your towel or a fresh towel and wipe away any residual moisture on the surface of the ball after you have wiped it off with your alcohol-soaked cloth, and it is best to clean your bowling ball.

Regularly Cleaning

Keep the ball clean by cleaning it regularly. Oil will become more difficult to remove from your ball if it remains on the surface for an extended period. This implies that if you clean your bowling ball after each game, it will stay cleaner for a longer time.

This cleaning method will save you a lot of money on professional cleaning services while improving your bowling game.

Wait until you have bowled.

Remain patient until you’ve had plenty of opportunities to bowl. In the world of bowling, bowlers and professionals refer to this type of thorough cleaning as “drawing the oil from the ball.” Put another way; it eliminates oil from your ball that has become embedded in the pores due to playing several games in a row. The number of games you should wait before performing a comprehensive cleaning is dependent on how often you play and on which lanes.

To keep your ball clean while playing on oily lanes, you need to get the oil removed from it approximately every 50 games. Better controlled roads may only necessitate thorough cleaning of your ball once every 70 to 100 games in the future. If you see your ball moving on the lane to change, it’s time for a thorough cleaning.

Tape up the finger holes

Cover your bowling ball’s finger holes with tape. You’ll need waterproof tape to complete this project. If water seeps into your ball’s finger holes, it will affect the way it performs. Smooth the tape over the holes to ensure that it is level and free of gaps.

You may wish to place an extra piece of tape in each finger hole to prevent water from getting in.

Fill a bucket with hot water.

Don’t fill your bucket to the top or overflowing. It would be best if you only used around half of a four-quart container’s contents. Whenever you submerge the ball in the water, make sure to provide some area for water to escape.

Put your ball in a bucket of hot water and wait for it to thaw. Oil is lighter than water, so soaking your ball in warm water can help you eliminate any stuck-on grime. Soak your ball for 20 minutes to give the water time to make its way into the pores.

Dry the ball

Remember to dry your ball after cleaning a bowling ball with a pail of warm water or a diluted cleaning solution. You may reuse your bowling ball in the same way as washed clothes are dried by hanging them up to dry.

Wipe away any remaining moisture from your bowling ball using a microfiber cloth. The fibers of this cleaning cloth can absorb seven times their weight in liquid, making it the favored choice. It won’t even touch your book’s cover, which is a bonus.

Remove the tape with the finger holes pointing downwards and set your bowling ball in a dry location after wiping away the extra moisture from washing. For best results, put it there for at least 12 hours before moving on. Don’t leave it out in the sun to dry if you can help it. That has the potential to distort or harm your ball.

Clean a Bowling Ball With Dawn

Alternatively, you may thoroughly clean your bowling ball with Dawn dishwashing soap. While other kinds of dish soap may do the job, bowlers appear to prefer Dawn.

Dawn has a milder recipe, yet it may still remove the greasy residue from the ball’s surface because of the saturated oil in the cloth. Mix warm water and 14 cups Dawn dishwashing liquid with ammonia.

Some bowling balls’ colors may bleed when they are cleaned using specific solutions. As a result, check in on your wet ball every five minutes to see how it’s doing. Remove the ball and see whether anything has changed. Although the integrity of the ball is unaffected, a faded or discolored ball may confuse.

You may rest easy knowing that even if the color is tampered with when oil accumulates on the coverstock after a few usages, it will return to its original state.

The bucket filling method is the same as when using ordinary H2O for cleaning. Wiping the submerged ball while it spins can help you get rid of more dirt.

It should work after 20 to 30 minutes of soaking. The cleaning solution should last long enough to clean your ball thoroughly without harming it. However, this is not a rule that must be followed religiously.

Depending on how often you clean your ball, you should be able to tell if it takes less time or more time to do so each time. Because of this, your detergent may be able to remove oil much more quickly than usual.

If it’s your first time, start slow by soaking the ball for approximately 20 minutes in a pail of warm water heated to 125 degrees F. If necessary, set a timer to help you stay within your limits.

Go to the pro shop

Visit your neighborhood bowling store with your bowling ball. Even if you’re a professional bowler, you probably don’t have access to your ball cleaning machine. Essentially, these devices are large water tanks heated at a high enough temperature to open the ball’s pores and remove even the most stubborn oil deposits. Most bowling alleys should have one of these machines.

Cleaning from a pro shop employee

Allow a member of the pro shop staff to clean your ball. This service is typically reasonably priced, and having a professional clean and polish your ball almost assures that it has been thoroughly cleaned and polished. Aside from that, your pro will be able to point out the harm that you would have missed had you not consulted him.

Wait till cleaning

Make a schedule for the time it will take until the ball is clean. Although the time it takes your pro shop to clean your ball can vary, you should assume it to get around an hour and a half on average. If you have a spare ball, you’ll have just enough time to fit in a few games during this period.

Alternative activities include doing errands, doing household tasks, reading a book, or playing a portable game while you’re sitting around. You will not be bored while your ball is being cleaned in this manner.

Bowl like a champion

You need to clean your bowling ball regularly after each game, and keep it in good shape. Cleaning your ball will help restore the original response and make it more consistent. To do this, follow the manufacturer’s instructions, and keep it out of the sun.

Frequently Asked Questions

What home things can you apply to clean a bowling ball?

Equal amounts of each ingredient in a mixing bowl Simple Green and rubbing alcohol in water in a spray container. Shake well to ensure that the ingredients are thoroughly mixed before using. Wipe it down with a microfiber cloth and use the homemade bowling ball cleaner to remove any residue. If you don’t have Windex on hand, this combination can be used as a homemade alternative.

Is it reasonable to clean a bowling ball with rubbing alcohol?

We’ve already demonstrated that isopropyl alcohol isn’t an effective cleaning for bowling balls. It’s also not a brilliant idea for a reactive bowling ball because of the friction it causes. You’re probably familiar with the way isopropyl alcohol dehydrates your skin. The pores of reactive bowling balls resemble those on the skin.

How do I clean a bowl?

Cleaning a Bowling Ball at Home

  • Easier cleaning
  • Rubbing alcohol
  • Regularly Cleaning

Deep Cleaning Your Ball at Home

  • Wait until you have bowled
  • Tape up the finger holes
  • Fill a bucket with hot water
  • Dry the ball

Clean a Bowling Ball With Dawn

Using an Oil Extraction Machine

  • Go to the pro shop
  • Cleaning from a pro shop employee
  • Wait till cleaning
  • Bowl like a champion

Can I use Windex to clean the bowling ball?

According to most bowlers who have tried it, dirt and filth come off the bowling ball easily using Windex. If your bowling ball has been soiled by more than just oil on the lanes, Windex may be a fantastic alternative. However, there are superior homemade bowling ball cleaning solutions available.

Can I use acetone to clean bowling balls?

Simple ball cleaners like Windex and rubbing alcohol work well, as a gallon of acetone from the hardware store does. If you “feel” that the ball requires more attention, the pro shop will clean and resurface it as necessary.